WEN 4208 8-Inch 5-Speed Drill Press

WEN 4208 8-Inch 5-Speed Drill Press
WEN 4208 8-Inch 5-Speed Drill Press WEN 4208 8-Inch 5-Speed Drill Press WEN 4208 8-Inch 5-Speed Drill Press WEN 4208 8-Inch 5-Speed Drill Press
Product Code: 4208
Reward Points: 0
Availability: In Stock
Price: $99.00
   - OR -   

WEN 8 in. 5 Speed Drill Press

Remember when power tools were actually powerful? WEN’s 8-inch swing, 5-speed drill press is small but powerful enough to drill through metal, wood, plastics, and other materials. When you need accurate and precise holes, this tool does the job more conveniently and precisely than a handheld drill. With a full two inches of spindle travel, this drill press is the perfect companion for both the job and the garage. The compact design makes transportation and storage easier than ever. The rigid base and frame consists of cast iron to ensure durability and accurate drilling. Its powerful induction motor features ball bearings for an extended life, all culminating in a smooth and balanced performance even at high speeds. The ½” chuck with JT33 spindle taper gives you versatility with a variety of bits. Worktable bevels 45° left and right for angled drilling. The base contains predrilled holes for mounting onto a bench or work stand. The slotted table allows for mounting clamps and vises for effective work-holding. And because its a WEN product, your drill press comes backed by a two-year warranty, a nationwide network of skilled service technicians and a helpful customer phone line. Remember when you could drill holes in any material? Remember WEN.

FEATURES:

  • Includes a 1/2-inch keyed chuck and onboard key storage
  • Chuck capacity smallest is 1.5mm (approx. 1/16 inch), largest is 13mm (approx. 1/2 inch)
  • Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
  • Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations
  • Durable 1/3 HP ( 2.3 amp ) induction motor develops ample torque and power
  • 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right
  • Spindle Taper JT33
  • Drill press Height from the Floor to the top ( 23")
  • Drill press Height from the Chuck to the Base (10 3/8 " )
  • Drill press Base ( 7 1/2"x11 1/2")
  • Size Column 1 3/4

Drill Press
Motor 120V, 60Hz
Horsepower 1/3 HP
Motor Speed 620 - 3100 RPM
Swing 8 inch
Drilling Capacity 1/2 inch
Chuck Capacity 1/2 inch
Pulley Speeds 5 Speeds (620, 1100, 1720, 2340, 3100)
Table Size (inch) 6-1/2 x 6-1/2"
Shipping Dimensions (inch) 18 x 13.5 x 9.2
Shipping Weight (lb) 35

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:




WEN Products © 2017